|
| |
Round Easy-Clean (CPR) Central Collector
C&W's Round Easy Clean
Central Dust Collector is the first in the concr ete
industry to EXPAND and grow with your rising
production demands,without having to replace the unit. Simply increase the CFM
of the collector from 5000 up to 8000 by purchasing an upgrade kit which only
costs a quarter of the price of a new collector!
Below are additional features of the C&W Round Easy-Clean Central Dust
Collector.
Here's a testimonial about this unit from Tom Williams
at University Ready-Mix in Fairbanks, Alaska:
"The dust collector you sold University Redi-Mix operates
perfectly. After installation (thanks for your help on that!) we made a simple
adjustment to one timer and never knew it was there after that. The
plant operator turns the unit on and off and in between we only know it's there
because we don't have any dust problems whatsoever. Our plan
is to finish the Eielson Air Base Paving Project and then install the collector
in a permanent facility in
Fairbanks
close to other businesses and I'm confident this equipment will help us insure a
good neighbor status."
Click here to see the Jobsite Report for this unit in Alaska.
Click here to view literature on the Round Easy
Clean Central Collector.
(Downloading literature will take few seconds)
Features:
- Unit is
Expandable from 5000 up to 8000 CFM to evolve with the
growing demands of Producers
- Simply upgrade to a higher filtration
capacity with an Upgrade Kit. C&W's Upgrade Kit includes an upsized
motor, fan, extra required cartridges, and other upgrade component items.
- Round Easy-Clean is like having 2
collectors in one, and the Upgrade Kit only costs about 1/4 the price of a
new collector!
- 99.99% filtration efficiency
- Gas spring assisted lid for easy access
to filter media (with safety latch)
- Vertical, wide pleated cartridges
- Space-saving foot print
- All service points are located at ground
level except for filter media
- High Volume Cleaning Capacity
- Alll moving parts are inside the unit for
longer life and protection from outside elements
- Quick-install. Unit
comes Pre-Assembled in one piece with motors, fans, and
control panel already installed.
Options:
- Automatic Recycle System
- On-Demand Smart Clean of Filter Media
- Silo Anti-Overfill System
- Pressure Relief Valves and Bin Indicators
- High-level Hopper Indicator
- Broken Filter Media Detector
- Caged Ladder
Specifications:
| Model Number |
CPR-5000-H |
CPR-6500-H |
CPR-8000-H |
| Total Filtration
Area (sq. ft.) |
535 |
668 |
891 |
| Number of
Cartridges |
12 |
15 |
20 |
| Cartridge Dia x
Length |
8" x 39" |
8" x 39" |
8" x 39" |
| Type of Filter
Media |
Spun-bound Polyester |
Spun-bound Polyester |
Spun-bound Polyester |
| Solenoid Valve Size |
1.5" |
1.5" |
1.5" |
| Number of Solenoids |
3 |
3 |
4 |
| Fan horsepower
|
10 |
10 |
15 |
| Normal Air Capacity
(CFM) |
5,000 |
6500 |
8000 |
| Min. Design
Efficiency* |
99.99% |
99.99% |
99.99% |
| Compressed Air Requirements (CFM) Using
60 sec. off time and 150 MS on time |
5 |
6 |
6 |
| Cleaning Mechanism |
Pulse Jet w/ Timer |
Pulse Jet w/ Timer |
Pulse Jet w/ Timer |
| *At Standard Test
Conditions |
Other Dust Collection Options
[Bag Jet][Round Easy Clean][Reverse
Air][Cartridge Pulse]
|
![[Company Logo Image]](_borders/knightlo.gif)
KNIGHT
INDUSTRIAL
EQUIPMENT
