|
| |
Projects Page Two
Below we have listed
some more projects we have done in the past which may be of further interest to
you. The Quick Links will take you to the project you are interested in, or to
other pages within this web.
Quick Links:
This is a bottom Ash Material Unloading
system capable of handling 150 TPH of material
weighing 60 PCF. The equipment consisted of two ( 2 ) 40 ton Truck Dump
Unloading Hoppers, two ( 2 ) SVEDALA Tractor Type 48" wide x 16 ft.
long Apron Feeders, charging one 60" wide pit Unloading Belt Conveyor, that
in turn charges a 48" x 700 ft. long transfer belt conveyor having multiple
convex and concave vertical curves. This 48" conveyor delivers the Ash
material direct to the Mill.
Knight Industrial Equipment supplied and installed two ( 2 ) Erie Strayer
Central mix Plants side by side, capable of producing concrete for the
manufacturer of either Prestressed products or Hollow Core slabs. These plants
came complete with a Knight Industrial designed Aggregate Material Handling
system and utilized a Command Data " EAGLE " Automated Batching
Control.
This Reclaim, Ship/Rail Loadout & continuous batching system, was
designed and supplied for the purpose of handling 750 TPH of DAP, MAP & GTSP
fertilizer materials. Prior to the commissioning of this equipment, the ship
loading procedure was preformed by charging a string of Rail Cars at each on-site warehouse location, then transporting this material by rail car to the
Port loadout facility approximately 2,000 ft. away. As a result, the net
material handling capacity of this system peaked at 120-125 TPH, and it required
approximately 60 people to perform this duty. Once the New Reclaim & Loadout
system was placed in operation, the capacity jumped significantly,
while reducing the manpower requirements at the same time. As a added bonus, we understand the
reduction in demurrage charges alone justified the capital expense for this
project.
Knight Industrial Equipment was commissioned to supply and install an Erie
Strayer Model MP-12 Ready-Mix plant with an Aggregate charging material handling
system and other related components. Our order included the design and supply of
all required civil work ( site preparation and foundations ), as well as the
Structural-Mechanical construction portions of this project.
Projects page 3
For More Information Contact:
Knight Industrial Equipment
3701 Airfield Drive West, Lakeland FL 33811
Tel: 863.646.2997
FAX: 863.647.2745
Internet:
info@knightindustrial.net
|
![[Company Logo Image]](_borders/knightlo.gif)
KNIGHT
INDUSTRIAL
EQUIPMENT
